Based in Enfield. Working across Adelaide and regional SA. 08 8151 1040

Fire safety guides for South Australia

Plain-English answers to the rules building owners, landlords and providers ask us about most. Every guide cites the official SA source and is reviewed by a registered technician.

  • Annual fire safety inspection checklist for Adelaide buildingsAn annual fire safety inspection pulls together every essential safety provision in your building, from extinguishers and exit lights to hydrants and fire doors, and confirms each has been serviced on its own MBS 002 schedule. In South Australia it also sets up the owner's Form 3, lodged with council within 60 business days after the end of each calendar year.Updated Nov 2026
  • What is AS 1851? Routine service of fire protection equipment in SAAS 1851-2012, Routine service of fire protection systems and equipment, is the Australian Standard that sets what must be checked on fire equipment and how often. In South Australia it applies through MBS 002 (version 3, May 2023), the state's maintenance instrument, with frequencies from monthly to 5-yearly depending on the system.Updated Nov 2026
  • What is AS 3745? Emergency planning for facilities in South AustraliaAS 3745, Planning for emergencies in facilities, is the Australian Standard for emergency plans, warden organisations, evacuation diagrams and exercises. It is widely used as best practice, but no South Australian law we have found mandates it, and the legal duty is the emergency plan every workplace must have under WHS regulation 43.Updated Nov 2026
  • AS/NZS 3760 and in-service testing of electrical equipment in SAAS/NZS 3760:2022 is the Australian and New Zealand Standard for in-service safety inspection and testing of electrical equipment and RCDs, the standard behind test and tag. In South Australia it is guidance, not law: the legal duty sits in the WHS Regulations, and SafeWork SA's intervals run from every 3 months on construction sites to at least every 12 months in other hostile environments.Updated Nov 2026
  • NCC building classes explained for South Australian ownersThe National Construction Code sorts every building into Classes 1 to 10 by what it is used for. Class 1 is houses, Class 2 is apartments, Classes 3 to 9 cover other residential, commercial, industrial and public buildings, and Class 10 is sheds, fences and other non-habitable structures. In South Australia the class also decides your Form 3 duty: Class 1a and 10 sit outside the essential safety provisions scheme, small buildings in some classes are exempt from lodging, and Class 2, 9a and 9c buildings have no size exemption.Updated Nov 2026
  • Building Fire Safety Committee inspections in South AustraliaA Building Fire Safety Committee is a body set up by a council, or a group of councils, under section 157 of the Planning, Development and Infrastructure Act 2016 to check whether existing buildings have adequate fire safety. If a committee finds they don't, it can serve notices that require the owner to report on the fixes within two months, carry out upgrade work or, in serious cases, stop people using the building.Updated Nov 2026
  • Bushfire overlays and Bushfire Attack Levels (BAL) in South AustraliaSouth Australia's Planning and Design Code has six bushfire hazard overlays, High Risk, Medium Risk, General Risk, Urban Interface, Regional and Outback, and some land sits outside all of them. The overlay decides which bushfire planning rules apply, and under SA's version of the building code it also sets the Bushfire Attack Level (BAL), with High Risk sites assessed individually under AS 3959.Updated Nov 2026
  • Bushfire preparation for SA businesses, rentals and care sitesPreparing a business for bushfire in South Australia means knowing your fire ban district and Fire Danger Season dates, writing a plan with actions for each Fire Danger Rating, and getting your people, site and firefighting equipment ready before the season starts. The CFS says your emergency management plan should address bushfire and be maintained, updated and tested regularly.Updated Nov 2026
  • Emergency evacuation plans for South Australian workplacesEvery South Australian workplace must have an emergency plan under regulation 43 of the WHS Regulations, covering emergency and evacuation procedures, calling emergency services, first aid, communication, how often the procedures are tested and how workers are trained. SafeWork SA says the plan should be written down, based on the hazards at your own site and displayed where people can see it.Updated Nov 2026
  • Evacuation diagram requirements in South AustraliaEvery South Australian workplace must have an emergency plan with evacuation procedures under WHS regulation 43, and a displayed evacuation diagram is the usual way to show people the way out. AS 3745 sets out what a good diagram contains and is widely treated as best practice, but no SA law we have found makes AS 3745 diagrams mandatory.Updated Nov 2026
  • How often emergency exit lights need testing in AdelaideIn South Australia, emergency and exit lighting is serviced every 6 months and every year, with monthly checks in between, under MBS 002 and AS/NZS 2293.2. At the 6-monthly test every light is run on battery power to check it stays lit when the mains fail.Updated Nov 2026
  • Total Fire Ban rules in South AustraliaA Total Fire Ban in South Australia bans lighting or keeping a fire in the open air in the declared fire ban district for that day, and the ban also covers outdoor welding, grinding and metal cutting, wood and charcoal barbecues, pizza ovens and campfires. The CFS declares bans district by district, usually on days rated Extreme or Catastrophic, and lists them with the next day's ratings between 4.30 pm and 5 pm.Updated Nov 2026
  • Fire Danger Ratings explained for South AustraliaThe Australian Fire Danger Rating System has four levels, Moderate, High, Extreme and Catastrophic, and a "no rating" state for days when no action is needed. The rating tells you how dangerous a fire would be if one started, not how likely a fire is, and in South Australia a Total Fire Ban is declared on days rated Extreme or Catastrophic.Updated Nov 2026
  • Fire Danger Season dates in South Australia for 2026-27The 2026-27 Fire Danger Season runs from 1 December 2026 to 30 April 2027 in the Adelaide Metropolitan and Mount Lofty Ranges districts, which cover greater Adelaide, and on Kangaroo Island. The other districts start earlier, on 15 October, 1 November or 15 November 2026, as the CFS sets dates for each of the state's 15 fire ban districts every year.Updated Nov 2026
  • Fire door ratings and inspections in South AustraliaA fire door's rating is its fire-resistance level (FRL), three numbers such as -/60/30 that give the minutes of structural adequacy, integrity and insulation, with a dash where there is no requirement. In South Australia, hinged fire doors are inspected every 6 months under MBS 002, and inspections are quoted per site on the number of doors.Updated Nov 2026
  • Fire drills and evacuation drills in South AustraliaA fire drill, or evacuation drill, is a practice run of your emergency plan so people know the alarm, the route and the assembly area. In South Australia your emergency plan sets how often you test it under WHS regulation 43, and some sectors set a minimum: childcare services must rehearse emergency and evacuation procedures every 3 months.Updated Nov 2026
  • How to dispose of an old fire extinguisher in AdelaideTake a household fire extinguisher to one of Green Industries SA's free metro drop-off depots for household chemicals, or ask your council where its nearest waste or recycling centre is, which may charge a fee. Don't empty powder, CO2, foam or wet chemical extinguishers first, and hand an old halon (BCF) extinguisher in at any fire station in South Australia.Updated Nov 2026
  • Do fire extinguishers expire? What SA owners need to knowThere's no single expiry date in the South Australian rules we've checked. A workplace extinguisher stays in service for as long as it keeps passing its AS 1851 checks every 6 months, plus a yearly and a 5-yearly service. For home extinguishers, the MFS says to check them every 6 months and have them tested or replaced once they reach a set age.Updated Nov 2026
  • Choosing a fire extinguisher for your home, kitchen, car or caravanFor a home, the MFS recommends a 1 kg dry chemical powder extinguisher rated at least 5B:E, or 1A:5B:E if you choose an ABE powder, plus a fire blanket, both mounted near the kitchen exit. For a car, caravan or boat it recommends a dry chemical powder extinguisher rated at least 1A:20B:(E), mounted near an exit where you can reach it without going near the fire.Updated Nov 2026
  • What does fire extinguisher testing cost in Adelaide?The cost depends on how many extinguishers you have, what types they are and which service is due: South Australia's MBS 002 calls up AS 1851-2012, which sets a 6-monthly inspection, a yearly service and a 5-yearly service. VD Fire & Electrical's 6-monthly servicing starts from $9 + GST per extinguisher.Updated Nov 2026
  • Fire extinguisher types and colours in AustraliaAustralian fire extinguishers are red, with a coloured band or label that tells you what is inside: no band for water, blue for foam, white for powder, black for CO2, oatmeal for wet chemical and yellow for vaporising liquid. Each type is rated for certain classes of fire, and using the wrong one can make a fire worse, so always read the label.Updated Nov 2026
  • Fire hose reel maintenance for Adelaide property ownersFire hose reels in South Australian buildings must be serviced every 6 months and every year, under MBS 002 and AS 1851-2012. Because they're connected to mains water, the testing must be done by someone with a CBS test and inspect registration.Updated Nov 2026
  • Fire hydrant inspections in AdelaideA fire hydrant inspection checks that the hydrant system, valves and booster will deliver water at full pressure when the fire brigade connects. South Australia's MBS 002 calls up AS 1851-2012, which schedules hydrant servicing from monthly through to 5-yearly, and the work needs a CBS test and inspect registration.Updated Nov 2026
  • What is checked in a fire safety audit or inspection?A fire safety audit checks that a building's fire safety equipment is in place, working and recorded, and that people can get out safely: the items on your Form 1, exits and paths of travel, signs and emergency lighting, the emergency plan and the service records behind your Form 3. Routine testing services each item on its own schedule, while an audit looks at the whole building and its paperwork at once.Updated Nov 2026
  • What fire tank and sprinkler inspections involve and how often they happenFire water tanks and sprinkler systems in South Australian buildings are serviced on AS 1851-2012 schedules, which MBS 002 calls up, running from frequent routine checks through 6-monthly and yearly services to longer-interval tests. Because sprinklers connect to mains water, testing needs a CBS test and inspect registration, plus a plumbing registration for annual and longer tests.Updated Nov 2026
  • Fire warden roles, responsibilities and hat coloursIn an emergency control organisation, the chief warden runs the response, floor or area wardens check their areas are clear and report to the chief warden, and wardens help move people to the exits and the assembly area. The helmet colours that follow AS 3745 are white for the chief warden and deputy chief warden, yellow for floor or area wardens and red for wardens.Updated Nov 2026
  • How often does test and tag need to be done in Adelaide?It depends on the environment: SafeWork SA's guidance is at least every 3 months on construction and demolition sites, every 6 months in manufacturing and commercial cleaning, and at least every 12 months in other hostile environments. Hire equipment is inspected before each hire and tested every 3 months, and test and tag with VD Fire & Electrical starts from $3.50 + GST per item.Updated Nov 2026
  • How to change a smoke alarm battery safelyTwist or slide the alarm off its ceiling base, swap the old battery for a new one of the type listed in the instructions, refit the alarm and hold the test button until it sounds. Alarms with a sealed 10-year lithium battery can't have the battery changed, so the whole alarm is replaced, and on a hardwired 240 V alarm you switch the power off first and only ever touch the alarm itself, never the base or the wiring.Updated Nov 2026
  • How to use a fire blanketPull the two tabs down sharply to release the blanket, turn your hands in so the blanket shields them, and lower it gently over the burning pan without throwing it. Then put a lid or tray on top, turn off the heat, call 000 and leave the pan for at least an hour, and replace the blanket once it has been used on a real fire.Updated Nov 2026
  • How to use a fire extinguisherRemember PASS: pull the pin, aim the nozzle at the base of the flames, squeeze the trigger while holding the extinguisher upright, and sweep from side to side across the base of the fire. Only tackle a fire no bigger than a waste paper basket, with your escape route behind you and someone already calling 000.Updated Nov 2026
  • Interconnected smoke alarms in South AustraliaInterconnected smoke alarms are linked by wires or by radio, so when one alarm detects smoke, every alarm in the home sounds. In South Australia they have been required in new homes since 1 May 2014, and the MFS recommends interconnecting multiple alarms in any home, whatever its age.Updated Nov 2026
  • Lithium-ion battery fire safety for homes and workplacesLithium-ion batteries in e-bikes, scooters, tools and phones can overheat and catch fire, and those fires are hard to put out and give off toxic gases. If a battery smokes or catches fire, don't touch it: get everyone out, close the door if safe and call 000.Updated Nov 2026
  • Photoelectric vs ionisation smoke alarms, and which one SA recommendsPhotoelectric smoke alarms detect the larger, visible smoke particles from smouldering fires, while ionisation alarms detect the tiny, invisible particles from flaming fires. South Australia's MFS says research shows photoelectric alarms give the best detection across a range of fires, and recommends photoelectric alarms that are hardwired and interconnected in every home.Updated Nov 2026
  • Power factor correction explained for SA businessesPower factor is the ratio of real power (kW), which does useful work, to apparent power (kVA), which is what the network has to supply. A low power factor means you draw more kVA for the same work, and on SA Power Networks' kVA-based demand tariffs that means higher demand charges. Power factor correction, usually with capacitors, brings the ratio closer to 1.Updated Nov 2026
  • How often RCD testing is legally required in AdelaideIn a South Australian workplace, WHS regulation 165 requires RCDs (safety switches) to be tested regularly by a competent person, with a record kept of every test other than daily ones. How often depends on the environment: SafeWork SA's guidance runs from a push-button test before each use on building sites to an operating-time test every 2 years in an office.Updated Nov 2026
  • SDA fire safety requirements and the SDA design standardThe SDA Design Standard (edition 1.1, for new SDA from 1 July 2021) requires the NCC fire safety provisions for the dwelling's building class, smoke alarms in bedrooms and living areas, and an evacuation plan given to the occupier. It calls sprinklers "desirable" rather than mandatory, but a Class 3 residential care building must be sprinklered throughout under the NCC.Updated Nov 2026
  • Why is my smoke alarm beeping or chirping, and how do I stop it?A single chirp every 40 seconds to a minute, with the red light flashing at the same time, is almost always a low battery warning, and a fresh battery (or a new alarm, if the battery is sealed) should stop it. If the chirping carries on, the alarm may need cleaning, may be running on its backup battery after a power cut, or may be at the end of its 10-year life and due for replacement.Updated Nov 2026
  • Smoke alarm rules in South Australia for landlords and tenantsEvery rental property in South Australia must have a working smoke alarm, and the owner is responsible for installing and maintaining it. The type required depends on when the home was built or sold: hardwired 240 V alarms since 1 January 1995, interconnected alarms in new homes since 1 May 2014, and hardwired or 10-year sealed battery alarms within 6 months of a sale.Updated Nov 2026
  • The test and tag colour chart and what it means in SAColour-coded test tags show which 3-month period an item was tested in: red for December to February, green for March to May, blue for June to August and yellow for September to November. The rotation is mainly used on construction and demolition sites, where equipment is tested every 3 months, and in South Australia it is a recommended convention rather than a legal requirement.Updated Nov 2026
  • How much does test and tag cost in Adelaide?Test and tag with VD Fire & Electrical starts from $3.50 + GST per item. Your total depends mostly on how many items you have and how often SafeWork SA's guidance says your type of workplace should retest, with RCD and 3 phase testing quoted per site.Updated Nov 2026
  • Wet chemical extinguishers and Class F fires in commercial kitchensA wet chemical extinguisher, red with an oatmeal band, is the type rated for Class F fires, which are fires in cooking oils and fats, so it is the usual choice beside the fryers and cooktops in a cafe or restaurant kitchen, together with a fire blanket. Never use water on burning oil, and never use wet chemical on live electrical equipment.Updated Nov 2026
  • What is SCADA? A plain guide to SCADA, PLCs and HMIsSCADA (supervisory control and data acquisition) is a system that gathers data from equipment spread across a site or a region, shows it to operators in one control room, and lets them control that equipment remotely. Out in the field, PLCs or remote terminal units (RTUs) run the local process, and operators see and control it through an HMI, the screen or panel they interact with.Updated Nov 2026
  • Which fire extinguisher should you use on an electrical fire?Use a carbon dioxide (CO2) extinguisher, which has a black band, or a dry powder extinguisher rated ABE or BE, which has a white band. Never use water, foam or wet chemical on an electrical fire, because all three are dangerous on energised electrical equipment.Updated Nov 2026

Book your next service

Tell us what's on site and we'll send a fixed price the same day.

Call 08 8151 1040 Get a quote