What our emergency lighting service covers
Emergency lights and exit signs have one job: to keep the way out visible when the power fails. Our technician switches the fittings to battery and checks that every emergency light and exit sign comes on and stays lit for the duration AS/NZS 2293.2 requires. They also check each fitting for damage, missing diffusers, faded legends and wrong or missing arrows, and that nothing blocks the light or the sign.
Each test is recorded in your logbook, and you get a written report listing every fitting by location with its result. Failed fittings are listed separately so you can see what needs repair. Building owners use the record as the maintenance evidence behind their annual Form 3.
Service intervals explained
South Australia’s maintenance standard, MBS 002 (version 3, May 2023), calls up AS/NZS 2293.2 for emergency lighting and exit signs.
| Interval | What happens |
|---|---|
| Monthly | A check between the formal tests, recorded in your logbook. |
| 6-monthly | Every fitting tested on battery. Failures recorded and reported. |
| Yearly | The 6-monthly test, plus the extra yearly requirements of AS/NZS 2293.2. |
Repairs and replacements
When a fitting fails, it is usually the battery. Batteries in emergency lights wear out over time and stop holding enough charge to last the test. Other failures come from lamps, control gear or physical damage. We list each failure by location and quote the repair or replacement, so you can approve the work and have the fitting retested.
Replacing a hardwired fitting is electrical work. We supply the fittings, and the hardwired work is done by our licensed electrical contractor, who issues the Certificate of Compliance.
If your building still has older fluorescent fittings, we can quote replacement with LED emergency lights and exit signs. We supply and install emergency lights and exit signs, for replacements and for new work.
Exit signs
Exit signs show occupants the way out. They carry the running-man symbol and, where needed, a direction arrow, and they must stay lit when the power fails. Signs that are damaged, faded or pointing the wrong way after a fit-out are some of the most common faults we report.
Emergency lighting and your Form 3
If your building lodges a Form 3, the owner signs it each year to confirm the essential safety provisions have been maintained, and lodges it with council within 60 business days after the end of each calendar year. We supply the maintenance records behind it and sign the contractor section. Councils cite $750 expiations for not lodging or not maintaining, and up to $10,000 if prosecuted.
Small buildings exempt from lodging a Form 3 must still maintain their essential safety provisions, so the 6-monthly and yearly tests still apply.
Between services
Between tests, keep an eye on the fittings in your building:
- Look out for exit signs that are dark, flickering or damaged, and report them.
- Keep exit signs and emergency lights clear of stacked stock, banners and new signage.
- Tell us before a fit-out or new walls. Exit routes, and the signs that mark them, may change.
- Don’t remove a fitting or disconnect its circuit without arranging a replacement.
- Keep your logbook on site so each test and repair can be recorded.
If a fitting has a charge indicator and it is out, the fitting may not run on battery when it needs to, so let us know.
Booking your first service
If we haven’t tested your building before, send us your Form 1 schedule of essential safety provisions if you have one, and your last service report or logbook. That tells us how many fittings to expect and where earlier failures were found. Tell us who can give access to locked areas, plant rooms and stairwells, and the best times for a test that switches circuits to battery. Call 08 8151 1040 to book.
Who we service
We test emergency lighting in offices, warehouses, factories, shops, schools, childcare centres, aged care facilities, healthcare buildings and strata complexes across Adelaide. For property managers and owners with several sites, we schedule every building on one plan and send one consolidated report. Test and tag and other electrical compliance work can be booked on the same visit.
Standards and service frequency in SA
| Equipment | How often | Standard | SA source |
|---|---|---|---|
| Emergency lighting and exit signs | Every 6 months and yearly, plus monthly checks | AS/NZS 2293.2 | MBS 002 v3 (SA) |
Who this is for
- Commercial officesWe service the fire safety systems in Adelaide offices and commercial buildings, from extinguishers and exit lights to alarms and fire doors, and supply the records behind the owner's Form 3.
- Industrial and warehousesWe service the fire safety systems in Adelaide warehouses, factories and industrial sites, from extinguishers and hose reels to hydrants, sprinklers and exit lights, and test and tag the equipment on the floor.
- Aged careWe install and maintain the fire safety systems in Adelaide's Class 9c aged care homes, from sprinklers and monitored smoke detection to exit lighting, fire doors and extinguishers, and supply the records behind your Form 3.
- Strata and apartmentsWe maintain the fire safety systems on the common property of Adelaide strata and community title buildings and supply the records the corporation needs for its annual Form 3.
- Schools and childcareWe service the fire safety equipment in Adelaide schools, kindergartens and childcare centres, and help services prepare for the evacuation rehearsals they must run.
- Hospitality and retailWe service the fire safety equipment in Adelaide restaurants, cafés, pubs and shops, from wet chemical extinguishers and fire blankets in the kitchen to exit lights and test and tag.
- Healthcare and medicalWe service the fire safety systems in Adelaide medical centres, dental and allied health clinics and other healthcare buildings, and supply the records behind the owner's Form 3.
- SDA and NDIS homesWe set up and maintain the fire safety in Specialist Disability Accommodation (SDA) and supported independent living (SIL) homes across Adelaide, from fire risk assessments and the move-in package to 6-monthly servicing and audit-ready records.
Certificates and reporting
Every visit ends with a written report listing each item tested, its location and result, and anything that needs attention. Building owners use it as the maintenance record behind their annual Form 3. We are qualified and authorised to carry out fire safety maintenance and sign off SA council ESP Form 2 and Form 3 maintenance documentation.
Ask us for a sample report if you want to see the format before you book.
Who does the work
- FPAS Recognised BusinessFire Protection Accreditation Scheme
- FPA Australia Bronze MemberFire Protection Association Australia
- Engineers AustraliaMember of the national body for engineers
- CBS PGE fire plumbing licenceConsumer and Business Services SA
- Licensed for electrical test and tagAS/NZS 3760 testing
All licences and certificates are held by suitably qualified personnel, and we are fully insured.
What customers say about our emergency and exit lighting work
VD Fire Safety and Electrical Company is highly recommended for its compliance services. The staff expertly installed industrial-grade extinguishers and blankets, as well as conducted installation and testing of equipment. They also ensured proper inspection and testing of exit/emergency lights and smoke alarms.
Additionally, the company provided valuable assistance in completing the ESP Certificate Form-3 and facilitated the submission process to the council.
I would highly recommend their services.
I recently used this company for fire safety and electrical compliance services and was highly satisfied. They provided high-quality fire extinguishers, blankets, and hose reels, ensuring proper installation and maintenance. Their electrical test and tag service was thorough, and exit/emergency lights were well-inspected. Smoke detectors were correctly installed and tested.
Professional, efficient, and fully compliant with safety standards. Highly recommended!