Based in Enfield. Working across Adelaide and regional SA. 08 8151 1040

Annual fire safety inspection checklist for Adelaide buildings

An annual fire safety inspection pulls together every essential safety provision in your building, from extinguishers and exit lights to hydrants and fire doors, and confirms each has been serviced on its own MBS 002 schedule. In South Australia it also sets up the owner's Form 3, lodged with council within 60 business days after the end of each calendar year.

An annual fire safety inspection checks that every essential safety provision in your building has been serviced on its own MBS 002 schedule, from extinguishers and exit lights to hydrants and fire doors. In South Australia it also sets up the owner’s Form 3, lodged with council within 60 business days after the end of each calendar year.

Running a commercial building means a scattered list of fire safety obligations, and it’s easy to lose track of what’s been done and what’s overdue. An annual review pulls it all together.

An annual fire safety inspection gives you a single point each year to confirm every part of your fire protection has been tested, tagged and recorded, rather than discovering a gap during a council audit or, worse, an emergency. The individual items have their own schedules, but once a year is the sensible moment to make sure none has slipped, because in South Australia that’s when your Form 3 is due.

Why annual fire safety inspections matter for Adelaide businesses

Fire safety equipment only protects people if it’s maintained. A blocked exit, a flat extinguisher or a dead exit light is worse than useless, because everyone assumes it works. Regular testing keeps each system reliable and gives you the paperwork that proves it.

In South Australia, that paperwork has a legal job. Building owners must lodge a Form 3 with council each year, within 60 business days after the end of the calendar year, confirming that the building’s essential safety provisions (ESPs) were maintained and tested (regulation 94 of the Planning, Development and Infrastructure (General) Regulations 2017). Your service records are the evidence behind it, and your defence in an audit or an insurance claim.

What your annual fire safety inspection checklist should cover

South Australia’s maintenance standard is MBS 002 (version 3, May 2023). It replaced SA 76 and calls up AS 1851-2012 for fire protection equipment and AS/NZS 2293.2 for emergency lighting. Different equipment runs on different intervals. A yearly overview should confirm all of these are up to date:

  • Portable fire extinguishers: 6-monthly, with a yearly and a 5-yearly service.
  • Fire hose reels: 6-monthly and yearly.
  • Fire hydrants and boosters: monthly to 5-yearly, depending on the component and test.
  • Fire detection and alarm systems: monthly to 5-yearly.
  • Emergency and exit lighting: 6-monthly and yearly services, plus monthly checks.
  • Hinged fire doors: 6-monthly.
  • Fire sprinkler systems and fire water tanks: on their AS 1851-2012 schedules.
  • Evacuation diagrams and the emergency plan: current, displayed and tested as your plan requires.

Not every building has all of these. Your building’s Form 1, the schedule of ESPs issued by council or the relevant authority, lists exactly which ones it has and what maintenance each needs. Start there.

What the inspection process involves

A thorough annual fire safety inspection works through the site methodically:

  • Reviewing your Form 1 and existing service records to see what’s due.
  • Testing and servicing each item of equipment to its MBS 002 and AS 1851 requirement.
  • Checking that access to exits, extinguishers, hose reels and hydrants isn’t obstructed.
  • Confirming signage, evacuation diagrams and service tags are present and legible.
  • Updating the records and flagging anything that needs repair or replacement.
  • Preparing the maintenance records the owner needs for the Form 3.

The goal is a clear status for every system, which takes more than a tick on a form. VD Fire & Electrical supplies the maintenance records and signs the contractor’s section of the Form 3. Lodging it with council is the owner’s obligation.

Compliance requirements and standards

The legal framework in South Australia has three layers:

  • MBS 002 sets how ESPs must be maintained, by calling up AS 1851-2012 for fire protection equipment and AS/NZS 2293.2 for emergency lighting.
  • Form 3 is the owner’s annual certificate to council. Class 1b buildings, and Class 3 to 9b buildings with a rise of 2 storeys or less and 500 m² or less, are exempt from lodging unless a section 157 notice or a performance solution applies. Class 1a and 10 buildings are outside the scheme. Exempt owners must still maintain their ESPs (regulation 94).
  • WHS regulation 43 requires every workplace to have an emergency plan covering emergency and evacuation procedures, how they are tested and how workers are trained (SafeWork SA Code of Practice). AS 3745 is the best-practice standard for emergency planning, but no SA law we have found mandates it.

Record-keeping is the thread through all of them. Regulation 94 sets a $750 expiation and a maximum penalty of $10,000 for not maintaining ESPs or not lodging the Form 3, and owners must produce up to 2 years of maintenance records within 48 hours if an authorised officer asks. Building Fire Safety Committees can also issue section 157 notices requiring fire safety work. A failed audit can follow from missing records even when the equipment itself is fine.

If your building is new, check the code it was approved under. NCC 2022 applies in South Australia until 30 April 2027, and the building provisions of NCC 2025 start on 1 May 2027 (PlanSA).

An annual review won’t replace the individual service schedules, but it’s the simplest way to make sure they’re all being kept, and to lodge your Form 3 knowing your building is covered. To book an inspection, call VD Fire & Electrical on 08 8151 1040 or request a quote. Our Form 3 page explains the paperwork in more detail, and our guides to AS 1851 and exit light testing cover two of the schedules. See also fire safety inspections.

Frequently asked questions

Is an annual fire safety inspection required in South Australia?
Each essential safety provision has its own maintenance schedule under MBS 002, many of them 6-monthly or more often. What is annual is the owner's Form 3, the certificate lodged with council within 60 business days after the end of each calendar year confirming the ESPs were maintained and tested.
Which buildings must lodge a Form 3?
Most commercial and multi-unit buildings. Class 1b buildings, and Class 3 to 9b buildings with a rise of 2 storeys or less and 500 m² or less, are exempt from lodging unless a section 157 notice or a performance solution applies. Class 1a and 10 buildings are outside the scheme. Exempt owners must still maintain their ESPs.
What is the penalty for not lodging a Form 3?
Regulation 94 of the Planning, Development and Infrastructure (General) Regulations 2017 sets a $750 expiation and a maximum penalty of $10,000 for not maintaining essential safety provisions or not lodging the Form 3.
Does every workplace need an emergency plan?
Yes. WHS regulation 43 requires every workplace to have an emergency plan, including evacuation procedures and how they will be tested. AS 3745 is the best-practice standard for emergency planning, but no SA law we have found makes it mandatory.
Who signs the Form 3?
The owner is responsible for lodging it. The maintenance contractor supplies the service records and signs the contractor's section to confirm the maintenance and testing were carried out.

Book your next service

Tell us what's on site and we'll send a fixed price the same day.

Call 08 8151 1040 Get a quote