Supply and installation
We work out which extinguishers your site needs, supply them, mount them and add them to your service plan. Our technician looks at what could burn in each area, how people move through the building and where the exits are. Each extinguisher goes on a bracket in a visible, easy-to-reach spot, with a location sign above it, and leaves with a dated tag.
If your building has a Form 1 schedule of essential safety provisions, we check the new units against it, so what is on the wall matches what the schedule says should be there. If an extinguisher is a new item rather than a replacement, we tell you, because the schedule may need updating by the relevant authority.
Choosing the right extinguisher
The right extinguisher depends on what could burn. As a starting point:
| Hazard | Usual choice |
|---|---|
| General workplace: paper, wood, plastics, flammable liquids | Dry powder |
| Electrical equipment, server rooms, switchboards | CO2 |
| Commercial kitchens with deep fryers and cooking oil | Wet chemical, often with a fire blanket |
Many sites need more than one type. A café, for example, usually needs wet chemical in the kitchen and a different type for the front of house and the switchboard. We explain the choice for each location in your quote, and our guide to fire extinguisher types and colours covers the label colours and the classes of fire each type is rated for.
Refills after use
An extinguisher that has been used, even for a second, has lost pressure and agent. It needs refilling or replacing before it can be relied on again. Call us after any discharge. Tell us the type and size and we’ll confirm how and when it can be refilled or replaced, then re-tag it and update your records.
If you have used an extinguisher on a real fire, check the other units in the area too. People often grab the nearest two or three, and a half-used unit can look normal on the wall.
Old and failed extinguisher disposal
Extinguishers reach the end of their life when they fail a service, are damaged or corroded, or would cost more to recondition than to replace. They also turn up in sheds, garages and old fit-outs long after anyone remembers buying them.
Don’t put a charged extinguisher in a household bin and don’t discharge it to empty it. It is a pressurised container. Ask us about taking old and failed units away when we visit. Once a unit is gone, we remove it from your service records so your report stays accurate.
What happens after installation
A new extinguisher is the start of a maintenance cycle, not the end of one. South Australia’s maintenance instrument, MBS 002 (version 3, May 2023), calls up AS 1851-2012, which sets a 6-monthly inspection with a yearly service and a 5-yearly service on top. Our fire extinguisher testing page explains each one.
If your building lodges a Form 3, the owner signs it each year to confirm the essential safety provisions have been maintained, and lodges it with council within 60 business days after the end of the calendar year. We supply the maintenance records behind it and sign the contractor section. Buildings that are exempt from lodging a Form 3 must still maintain their essential safety provisions.
Who we supply
We supply and install extinguishers for offices, warehouses, factories, shops, cafés, construction sites, SDA homes, strata buildings and rental properties across Adelaide. For property managers and providers with many sites, we can kit out every property to one standard and keep them all on one service plan.
Standards and service frequency in SA
| Equipment | How often | Standard | SA source |
|---|---|---|---|
| Portable fire extinguishers (after installation) | Every 6 months, plus yearly and 5-yearly services | AS 1851-2012, section 10 | MBS 002 v3 (SA) |
| Fire blankets | Every 6 months | AS 1851-2012 | MBS 002 v3 (SA) |
Who this is for
- Commercial officesWe service the fire safety systems in Adelaide offices and commercial buildings, from extinguishers and exit lights to alarms and fire doors, and supply the records behind the owner's Form 3.
- Industrial and warehousesWe service the fire safety systems in Adelaide warehouses, factories and industrial sites, from extinguishers and hose reels to hydrants, sprinklers and exit lights, and test and tag the equipment on the floor.
- Hospitality and retailWe service the fire safety equipment in Adelaide restaurants, cafés, pubs and shops, from wet chemical extinguishers and fire blankets in the kitchen to exit lights and test and tag.
- Construction sitesWe test and tag site electrical equipment, supply and service fire extinguishers, and help builders put emergency plans in place on Adelaide construction sites.
- Landlords and property managersWe test, replace and certify smoke alarms in Adelaide rental properties, and give you a compliance certificate for every property we check.
- HomesWe help Adelaide households with the fire safety that matters most at home: working smoke alarms that meet the SA rules for your home's age, a fire blanket in the kitchen and the right extinguisher.
- SDA and NDIS homesWe set up and maintain the fire safety in Specialist Disability Accommodation (SDA) and supported independent living (SIL) homes across Adelaide, from fire risk assessments and the move-in package to 6-monthly servicing and audit-ready records.
Certificates and reporting
Every visit ends with a written report listing each item tested, its location and result, and anything that needs attention. Building owners use it as the maintenance record behind their annual Form 3. We are qualified and authorised to carry out fire safety maintenance and sign off SA council ESP Form 2 and Form 3 maintenance documentation.
Ask us for a sample report if you want to see the format before you book.
Who does the work
- FPAS Recognised BusinessFire Protection Accreditation Scheme
- FPA Australia Bronze MemberFire Protection Association Australia
- Engineers AustraliaMember of the national body for engineers
- CBS PGE fire plumbing licenceConsumer and Business Services SA
- Licensed for electrical test and tagAS/NZS 3760 testing
All licences and certificates are held by suitably qualified personnel, and we are fully insured.
What customers say about our fire extinguishers work
VD Fire Safety and Electrical Company is highly recommended for its compliance services. The staff expertly installed industrial-grade extinguishers and blankets, as well as conducted installation and testing of equipment. They also ensured proper inspection and testing of exit/emergency lights and smoke alarms.
Additionally, the company provided valuable assistance in completing the ESP Certificate Form-3 and facilitated the submission process to the council.
I would highly recommend their services.
I recently used this company for fire safety and electrical compliance services and was highly satisfied. They provided high-quality fire extinguishers, blankets, and hose reels, ensuring proper installation and maintenance. Their electrical test and tag service was thorough, and exit/emergency lights were well-inspected. Smoke detectors were correctly installed and tested.
Professional, efficient, and fully compliant with safety standards. Highly recommended!