Based in Enfield. Working across Adelaide and regional SA. 08 8151 1040

Smoke alarm compliance for Adelaide landlords and property managers

We test, replace and certify smoke alarms in Adelaide rental properties, and give you a compliance certificate for every property we check. Alarms are checked once a year on our subscription, and can be checked again whenever a property changes hands. Annual testing starts from $89 + GST per property.

Written for Property managers and rental agencies, Private landlords and investors, Community and social housing providers, Buyers of a home or rental property

The SA smoke alarm rules, by build date and on sale

What a South Australian home needs depends on when it was built and whether it has been sold or transferred since 1 February 1998. Work out where each property in your rent roll sits.

If the home… It needs at least…
was built before 1 January 1995 A battery smoke alarm
was built from 1 January 1995 240 V hardwired smoke alarms
is a new dwelling from 1 May 2014 Hardwired smoke alarms, interconnected
changed owner on or after 1 February 1998 Hardwired or 10-year non-removable battery alarms, fitted within 6 months of transfer

The sale rule catches many landlords out. If you bought an older rental after February 1998, the replaceable battery alarm that came with it may not be enough. The new owner has 6 months from transfer to fit compliant alarms, and fines of up to $750 apply.

What rentals need on top

SA.GOV.AU puts it simply: all rental properties must have a working smoke alarm installed. It also advises checking alarms at routine inspections.

“Working” is the part that matters. An alarm past its expiry date, a battery taken out to stop nuisance chirping, or an alarm painted over during a repaint can all fail a fire. Our yearly check finds these before a tenant needs the alarm.

Any work on a hardwired alarm must be done by a registered electrical worker, who issues an electronic Certificate of Compliance for it. Our hardwired alarm work is done by our licensed electrical contractor, who issues the certificate.

What we check at each property

Every visit follows the same steps, so the certificate means the same thing for every property on your rent roll.

  1. Count and locate. We record every alarm and where it is, and check each one is in a sensible place for the home’s layout.
  2. Identify. We note each alarm’s type, power source (hardwired, 10-year lithium or replaceable battery) and expiry or manufacture date.
  3. Test. We test each alarm with its test button and check that interconnected alarms sound together.
  4. Check against the rules. We compare what is installed with what the property needs for its build date and sale history.
  5. Fix or quote. We replace failed or expired alarms where you have pre-approved it, or quote the work if you haven’t.
  6. Certify. You get the certificate for the property, with photos of anything we replaced.

When to book a check

Our yearly subscription covers the routine. These are the other moments a check earns its cost:

  • After settlement. The 6-month window for compliant alarms starts at transfer.
  • Between tenancies. The property is empty, so access is easy and any rewiring causes no disruption.
  • After renovations. New ceilings, paint and extra bedrooms can all affect where alarms need to be and whether they still work.
  • After a tenant complaint. A chirping or false-alarming alarm is often a sign it needs replacing.
  • Before you list a property for sale. A buyer’s inspector may ask what alarms are fitted.

A compliance certificate for every property

Property managers need proof, not promises. After every check you receive a certificate for that property showing:

  • the address and the date of the check
  • each alarm’s location, type (photoelectric or ionisation), power source and expiry date
  • the test result for each alarm, including interconnection where fitted
  • anything replaced, and why
  • the electronic Certificate of Compliance number for any hardwired work
  • the date the next check is due

Save it to the property file, attach it to the routine inspection report, and send a copy to the landlord. If an insurer or a tribunal ever asks whether the alarms worked, the answer is in one document.

Bulk booking for rent rolls

Agencies with 50 or 500 properties don’t want 500 phone calls. Send us your list and we’ll handle it.

  1. You send the rent roll. Addresses, tenant contact details and any access notes, in a spreadsheet.
  2. We plan the round. Properties are grouped by suburb, so we spend time testing, not driving.
  3. Access is booked with tenants. Tell us the notice your tenants must get.
  4. We test on the day. Failed or expired alarms are replaced where the landlord has pre-approved it, up to a limit you set, or quoted for a return visit.
  5. You get the certificates. One per property, plus a summary of every property done, every alarm replaced and any property we could not get into.

Ask us how many replacement alarms can be fitted on the day.

Photoelectric alarms

When we replace an alarm, we fit a photoelectric smoke alarm. MFS recommends photoelectric alarms hard-wired to the 240 V supply as the best protection across a range of fires. Where a property is allowed a battery alarm, we fit a 10-year non-removable battery model, so there is no battery for a tenant to take out and nothing to replace for a decade. If a property has a mix of old and new alarms, we will tell you which ones to replace first and why.

Tenant liaison

We treat tenants as the people who live there. Visits are booked at a time that suits them, and we explain what we are doing when we arrive. If a tenant has removed an alarm or a battery, we tell the property manager, not the tenant’s neighbours. If a tenant has hearing loss, we can quote strobe or vibrating alarms, which MFS recommends for people who are deaf or hard of hearing.

The yearly subscription

The simplest way to stay compliant is to put every property on a yearly check, tested and certified each year.

Annual testing starts from $89 + GST per property. If you manage a number of rentals, send us the list and we’ll book them in together. Ask us what the yearly check includes, such as batteries or replacement alarms.

We can also check a property between tenancies or after settlement on a one-off visit.

Beyond smoke alarms

Many landlords also want:

For apartments, the building’s common-area fire systems are usually the strata corporation’s responsibility. See our strata page.

The rules that apply

RequirementWhat it meansStandardSA source
Homes built before 1 January 1995 Battery smoke alarm as a minimum Smoke alarm legislation (SA) MFS
Homes built from 1 January 1995 240 V hardwired smoke alarms Smoke alarm legislation (SA) MFS
New dwellings from 1 May 2014 Hardwired alarms, interconnected Smoke alarm legislation (SA) MFS
On sale or transfer (since 1 February 1998) 6 months to fit hardwired or 10-year non-removable battery alarms. Fines up to $750 Smoke alarm legislation (SA) SA.GOV.AU smoke alarms
Rental properties A working smoke alarm must be installed. Check it at routine inspections Residential tenancies (SA) SA.GOV.AU
Hardwired alarm installation or replacement Each time hardwired work is done Registered electrical worker and an electronic Certificate of Compliance SA.GOV.AU, Office of the Technical Regulator

Frequently asked questions

What are the smoke alarm rules for rental properties in South Australia?
All rental properties must have a working smoke alarm installed. What type is needed depends on when the home was built and whether it has changed hands: homes built from 1 January 1995 need 240 V hardwired alarms, new dwellings from 1 May 2014 need them interconnected, and a home bought since 1 February 1998 needs hardwired or 10-year non-removable battery alarms within 6 months of transfer.
Who is responsible for smoke alarms in a rental, the landlord or the tenant?
The rule is that all rental properties must have a working smoke alarm installed. In practice the landlord arranges it, usually through the property manager, and SA.GOV.AU advises checking alarms at routine inspections. Tenants should report an alarm that chirps, fails its test button or has been removed.
Can a property manager replace a hardwired smoke alarm?
No. Hardwired smoke alarm work needs a registered electrical worker, who must issue an electronic Certificate of Compliance. A property manager can press the test button at an inspection, but replacing or rewiring a hardwired alarm is electrical work.
I've just bought a rental property. What do I need to do?
Since 1 February 1998, a new owner has 6 months from transfer to fit hardwired or 10-year non-removable battery smoke alarms. Fines of up to $750 apply. Book a check as soon as settlement is done so there's time to fix anything the property needs.
Do smoke alarms in older homes have to be interconnected?
The interconnection rule applies to new dwellings from 1 May 2014. The rule on sale or transfer asks for hardwired or 10-year non-removable battery alarms, not interconnection. We still recommend interconnection where it's practical, because every alarm then sounds when one detects smoke.
What does the compliance certificate show?
For each property: the address, the date, every alarm's location, type, power source and expiry date, its test result, anything replaced, and the electrical Certificate of Compliance number for any hardwired work. It's VD Fire & Electrical's service record, not a government certificate, and it's what your file and your insurer will want.
What if a tenant won't give access?
We tell the property manager straight away and list the property as not done in your summary, so nothing is reported as tested when it wasn't. The property manager can then arrange access under the tenancy agreement and we'll rebook.
How much does the yearly smoke alarm subscription cost?
Annual smoke alarm testing starts from $89 + GST per property. If you manage a number of rentals, send us the list and we'll book them in together. Replacement alarms are quoted before we fit them.

Tell us about your properties

We send quotes the same day and call back within 15 minutes during business hours. Prefer to talk? Call 08 8151 1040.

No obligation. We only use your details to reply to this request.

Book your next service

Tell us what's on site and we'll send a fixed price the same day.

Call 08 8151 1040 Get a quote