People search for an extinguisher’s expiry date because they’ve found an old one under the sink, or a tag that hasn’t been touched in years. The short answer is that an extinguisher isn’t judged by a use-by date. It’s judged by its service record and its condition, and the rules are different for a workplace and for your home.
Do fire extinguishers expire in Australia?
We haven’t found an SA law or standard that gives extinguishers a fixed expiry date. Instead:
- In workplaces and buildings with essential safety provisions, extinguishers are kept in service through routine maintenance. The MFS says that in South Australia, maintenance of essential safety provisions must follow Ministerial Building Standard 002, in line with AS 1851 (MFS). An extinguisher that keeps passing those checks stays in service. One that fails comes out of service.
- At home, the MFS works on age and condition. Its fact sheets tell you to check your extinguisher every 6 months and to have it tested or replaced once it reaches a certain age (more on that below).
How often are extinguishers serviced in SA?
AS 1851-2012 is the Australian Standard for routine service of fire protection equipment. It requires a six-monthly inspection of portable fire extinguishers, plus a yearly and a five-yearly service. That schedule is set out in the Australian Maritime Safety Authority’s guidance on AS 1851, which quotes the standard’s requirements.
So across five years, a workplace extinguisher should have a record of regular 6-monthly inspections, yearly services and one 5-yearly service. If any of those are missing, the extinguisher is overdue, whatever its age.
For buildings that lodge a Form 3 with council, those service records are the evidence behind the certificate. The Form 3 must be submitted within 60 business days after the end of each calendar year, and councils such as the City of Marion say fines range from a $750 on-the-spot fee up to $10,000 if prosecuted (City of Marion).
How to read a fire extinguisher service tag
The service tag, or maintenance record label, is the extinguisher’s history. AS 1851’s six-monthly checks include making sure the maintenance record tag or label is firmly attached to the extinguisher (AMSA). A missing or loose tag is a fault in itself, because nobody can tell when the unit was last serviced.
When you look at a tag:
- Find the most recent service marked on it. If the last entry is more than 6 months old, the extinguisher is due for its next inspection.
- Look for the longer services. Check that a yearly service has been recorded in the last 12 months, and that a 5-yearly service has been done when it fell due.
- Check the tag is attached and readable. A tag you can’t read is as good as no tag.
If you can’t work out how your tag is marked, ask the company that services your extinguishers to show you. They can also give you a written service report for every unit, which is easier to check than a row of tags.
While you’re looking at the tag, glance over the extinguisher itself. The six-monthly checks listed in AMSA’s guidance include:
- the anti-tamper device (the seal and pin) is intact
- the operating instructions are clean and legible
- there is no damage, and no pitting or corrosion
- the hose is securely fitted, and shows no cracking or other damage
- the pressure gauge, where fitted, is legible and reading in the operable range
- the location sign is visible and the bracket is secure
How long does a home fire extinguisher last?
The MFS gives home owners simple steps. At least every six months, take a dry powder extinguisher off its bracket, shake it gently so the powder hasn’t compacted, check the gauge is reading in the green zone, and look for any other damage. If you have any concerns, replace it. For other types, check the gauge every six months, do a visual inspection and follow the manufacturer’s maintenance instructions (MFS fire extinguishers for domestic use).
On age, the MFS gives two figures in two fact sheets. The domestic extinguisher fact sheet says to replace the extinguisher, or have it serviced and pressure tested, when it reaches 10 years of age. The equipment disposal fact sheet says domestic extinguishers should be tested or replaced after five years (MFS fire safety equipment disposal). The safe reading is to have a home extinguisher checked by five years, and replaced or pressure tested by ten.
If you keep an extinguisher on a boat, the MFS also says to check for saltwater corrosion.
When should an extinguisher be replaced?
Based on the MFS and AS 1851 checks above, an extinguisher should come out of service and be replaced or professionally serviced if:
- the gauge is outside the green or operable range
- the body is damaged, pitted or corroded
- the hose is cracked or the seal and pin are missing
- it’s a home unit past the MFS age guidance with no service history
- it’s a halon (BCF) unit, which the MFS says has been illegal to own or use in Australia since 1995
In a workplace, if a unit fails at a service visit, ask your technician to explain why and to quote a replacement before any work is done.
How do you dispose of an old extinguisher?
Dry powder, CO2, foam and wet chemical extinguishers can go to a waste or recycling centre, and your council can tell you the nearest one. These centres may charge a disposal fee. For those types, the MFS says not to empty the extinguisher before disposal unless it was used in an emergency. An empty water extinguisher can go to a waste or recycling centre or a scrap metal facility, as long as it was discharged safely. Halon extinguishers are the exception. Hand them in at any fire station in South Australia, because they are the only type the fire service accepts (MFS).
Getting your extinguishers checked
If you’re not sure your extinguishers are current, the tag and the service report will tell you. VD Fire & Electrical services extinguishers across Adelaide from $9 + GST per extinguisher. See our fire extinguisher testing service, or read what extinguisher testing costs and our guide to extinguisher types and colours.