Based in Enfield. Working across Adelaide and regional SA. 08 8151 1040

AS/NZS 3760 and in-service testing of electrical equipment in SA

AS/NZS 3760:2022 is the Australian and New Zealand Standard for in-service safety inspection and testing of electrical equipment and RCDs, the standard behind test and tag. In South Australia it is guidance, not law: the legal duty sits in the WHS Regulations, and SafeWork SA's intervals run from every 3 months on construction sites to at least every 12 months in other hostile environments.

AS/NZS 3760:2022 is the standard for in-service inspection and testing of plug-in electrical equipment and RCDs, the standard behind test and tag. In South Australia it is guidance rather than law: the legal duty sits in the WHS Regulations, and SafeWork SA uses the standard for how often and how to test.

What AS/NZS 3760 is

AS/NZS 3760:2022, In-service safety inspection and testing of electrical equipment and RCDs, is a joint Australian and New Zealand Standard. It covers electrical equipment once it is in service: the leads, tools, power boards and appliances that plug into a socket, and residual current devices (RCDs or safety switches).

Standards Australia’s overview of the standard lists what it covers:

  • Inspection procedures, the visual check that catches most faults
  • Testing procedures, such as earth continuity, insulation resistance and polarity
  • Inspection and testing frequency
  • Documentation and tagging
  • Competency requirements for the person doing the work

Standards Australia’s catalogue lists AS/NZS 3760:2022 as current, with one amendment (Amendment 1, published December 2022). It replaced the 2010 edition.

Guidance, not law, in South Australia

AS/NZS 3760 is not itself law in South Australia. The legal duty sits in the Work Health and Safety Regulations 2012 (SA). Regulations 150 and 163 to 165 deal with electrical equipment and RCDs, including regular inspection and testing by a competent person of equipment used in hostile operating environments. SafeWork SA’s guidance on inspection and testing of electrical equipment treats AS/NZS 3760:2022 as the guidance for how to do it.

In practice, following AS/NZS 3760 is the accepted way to show you have met your duty. If an inspector asks how you manage electrical equipment, a test and tag register kept to the standard is the evidence.

SafeWork SA test intervals

SafeWork SA sets intervals by type of workplace:

Workplace Interval
Construction (portable equipment) Every 3 months
Hire equipment Inspected before each hire, tested every 3 months
Manufacturing and commercial cleaning Every 6 months
Other hostile environments At least every 12 months
Low-risk areas such as offices Up to 5 years

A hostile environment is one where equipment is exposed to things that can damage it, such as moisture, heat, vibration, mechanical damage, corrosive chemicals or dust. The 5-year interval applies only where equipment isn’t flexed in normal use, isn’t open to abuse and isn’t in a hostile environment. See our guide to how often test and tag is needed.

What happens in a test

A typical test under AS/NZS 3760 has two parts.

  1. Visual inspection. The tester checks the plug, lead, cord grips and casing for damage, burns, exposed wires, missing parts and unsafe repairs. Many faults are found here.
  2. Electrical tests. Depending on the equipment, the tester checks earth continuity, insulation resistance and polarity with a portable appliance tester.

WHS regulation 150 says the record of each test must show who did it, the date, the result and when the next test is due, and the record can be a tag. Equipment that fails is taken out of service, labelled so nobody uses it, and listed in the report so it can be repaired or thrown out.

RCDs and safety switches

AS/NZS 3760 also covers RCDs, both portable units and those fixed in the switchboard. An RCD cuts power when current leaks to earth, which is what protects a person from a fatal shock. Testing checks that it trips, and how quickly. See RCD testing and our guide to how often RCDs should be tested.

Tag colours

Colour-coded tags are not a legal requirement in SA. The quarterly colour rotation is the recommended tag coding in SafeWork SA’s guideline for construction and demolition sites, where AS/NZS 3012 applies under WHS regulation 163. See our guide to test and tag colours.

Records you should keep

A test and tag register should show each item, where it is, the test date, the result, the next test date and who tested it. It should also record failed items and what happened to them. Keep it with your WHS records.

3-phase equipment

Three-phase leads and equipment are tested under the same framework as single-phase items, with test equipment suited to them. See 3-phase appliance testing.

To book test and tag to AS/NZS 3760:2022, from $3.50 + GST per item, call VD Fire & Electrical on 08 8151 1040 or see test and tag.

Frequently asked questions

What is AS/NZS 3760?
AS/NZS 3760:2022, In-service safety inspection and testing of electrical equipment and RCDs, is the standard for checking plug-in electrical equipment once it is in use. It covers inspection, testing, how often equipment is tested, tagging and records, and the competency of the person doing it.
Is AS/NZS 3760 mandatory in South Australia?
No. SafeWork SA treats AS/NZS 3760:2022 as guidance. The legal duty is in the WHS Regulations: regulations 150 and 163 to 165 deal with inspecting and testing electrical equipment and RCDs. Following AS/NZS 3760 is the usual way to show you have met that duty.
How often does equipment need to be tested in SA?
SafeWork SA's intervals are every 3 months for construction, every 6 months for manufacturing and commercial cleaning, and at least every 12 months for other hostile environments. Hire equipment is inspected before each hire and tested every 3 months.
Does AS/NZS 3760 set the test tag colours?
No. The quarterly colour rotation used on construction sites is the recommended tag coding in SafeWork SA's guideline for construction and demolition sites, where AS/NZS 3012 applies. See our guide to test and tag colours.
Who can test and tag in South Australia?
The WHS Regulations require testing by a competent person. AS/NZS 3760 sets out the skills and knowledge needed. VD Fire & Electrical is qualified and licensed for electrical test and tag.

Book your next service

Tell us what's on site and we'll send a fixed price the same day.

Call 08 8151 1040 Get a quote