Based in Enfield. Working across Adelaide and regional SA. 08 8151 1040

3 phase appliance testing in Adelaide

3 phase appliance testing is the inspection, electrical testing and tagging of plug-in equipment that runs on a 3 phase supply, such as welders, compressors and commercial kitchen equipment. It follows the same SafeWork SA intervals as other test and tag, from every 3 months on construction sites, and we give you a fixed quote per site.

What 3 phase appliance testing is

3 phase appliance testing is test and tag for heavier equipment. Instead of a standard 10 A power point, these items plug into a 3 phase outlet, usually a round, multi-pin industrial socket. They are common wherever a lot of power is needed: welders, air compressors, large saws and lathes, floor scrubbers, kilns and some commercial kitchen equipment.

The goal is the same as any test and tag: find a damaged lead, plug or earth connection before it hurts someone. The difference is the equipment, the test gear and the extra care needed with higher voltages and currents.

Common 3 phase equipment

  • Welders, plasma cutters and other workshop equipment
  • Air compressors and pumps
  • Commercial kitchen equipment that plugs into 3 phase outlets
  • Floor scrubbers and industrial cleaning machines
  • 3 phase extension leads and cord sets
  • Kilns, heaters and other high-power plug-in equipment

Send us a list of your 3 phase equipment and we’ll confirm what can be tested on the visit.

The tests

Each item is checked by eye for damage to the plug, lead, casing and guards, then electrically tested with gear and methods suited to 3 phase equipment. It gets a durable tag showing who tested it, the date, the result and when it is next due, and it is added to your register.

How often 3 phase equipment must be tested

3 phase plug-in equipment falls under the same rules as all other plug-in equipment. WHS regulation 150 requires it to be regularly inspected and tested by a competent person if it is used in conditions likely to damage it. SafeWork SA’s intervals are:

Workplace How often
Construction sites Every 3 months
Manufacturing Every 6 months
Other hostile environments At least every 12 months
Hire equipment At each hire, and every 3 months

A record of each test must be kept until the next test, or until the equipment is permanently removed from the workplace or disposed of. The tag on the item can be that record.

Plug-in versus hardwired equipment

Test and tag, including 3 phase testing, covers equipment connected by a flexible lead and plug. Machinery that is wired straight into the switchboard is part of the fixed electrical installation. Inspecting or repairing that wiring is electrical work, which needs a registered electrical worker.

If you are not sure which of your machines are plug-in and which are hardwired, we can sort that out on the first visit and quote each group separately.

Planning around production

3 phase equipment is often the equipment a business cannot easily stop. Each item must be unplugged for testing, so we plan the visit with you: early starts, shift changes, scheduled maintenance days or a staged round across the site. Send us a list of your 3 phase items with their locations, and we will give you a fixed quote and a plan before we arrive.

Who we test for

  • Manufacturers and fabricators, with welders, compressors and machine tools on the floor
  • Builders and trades, whose 3 phase site equipment needs testing every 3 months
  • Commercial kitchens, cafes and caterers, where plug-in cooking and dishwashing equipment works hard in heat and moisture
  • Cleaning contractors, with industrial floor machines moved from site to site
  • Hire businesses, whose equipment must be tested at each hire and every 3 months
  • Schools, TAFE workshops and hospitals, with technical, laundry or kitchen equipment on 3 phase supply

What to send for a fixed quote

The more we know before we arrive, the tighter the quote. Send us the site address, a rough count of 3 phase items and their types, a rough count of single phase items if you want those tested too, and any times the equipment cannot be stopped. If you have a register from a previous provider, send that as well.

One visit for all your electrical testing

Most sites with 3 phase equipment also have single phase tools, leads and RCDs. We can test all of it on the same visit and give you one register. See test and tag and RCD testing.

Standards and service frequency in SA

EquipmentHow oftenStandardSA source
3 phase plug-in equipment on construction sites Every 3 months AS/NZS 3760:2022 (guidance) and WHS Regulations 2012 (SA), regulations 150 and 163 SafeWork SA
3 phase plug-in equipment in manufacturing Every 6 months AS/NZS 3760:2022 (guidance) and WHS Regulations 2012 (SA), regulation 150 SafeWork SA
3 phase plug-in equipment in other hostile environments At least every 12 months AS/NZS 3760:2022 (guidance) and WHS Regulations 2012 (SA), regulation 150 SafeWork SA
3 phase hire equipment At each hire, and every 3 months AS/NZS 3760:2022 (guidance) and WHS Regulations 2012 (SA), regulation 150 SafeWork SA

Who this is for

Certificates and reporting

Every visit ends with a written report listing each item tested, its location and result, and anything that needs attention. Building owners use it as the maintenance record behind their annual Form 3. We are qualified and authorised to carry out fire safety maintenance and sign off SA council ESP Form 2 and Form 3 maintenance documentation.

Ask us for a sample report if you want to see the format before you book.

Who does the work

  • FPAS Recognised BusinessFire Protection Accreditation Scheme
  • FPA Australia Bronze MemberFire Protection Association Australia
  • Engineers AustraliaMember of the national body for engineers
  • CBS PGE fire plumbing licenceConsumer and Business Services SA
  • Licensed for electrical test and tagAS/NZS 3760 testing

All licences and certificates are held by suitably qualified personnel, and we are fully insured.

Frequently asked questions

What is 3 phase appliance testing?
It is test and tag for equipment that plugs into a 3 phase outlet rather than a standard power point. The equipment is inspected, electrically tested and tagged, and the result is recorded, in the same way as single phase equipment but with test gear and methods suited to 3 phase.
Does 3 phase equipment need to be tested and tagged?
Yes, if it is plug-in equipment used in conditions likely to damage it. WHS regulation 150 covers equipment supplied through a socket outlet, which includes 3 phase plugs and sockets. Most 3 phase equipment is used in workshops, factories, kitchens and building sites, where that test applies.
How often should 3 phase appliances be tested?
The same intervals apply as for other plug-in equipment. SafeWork SA's intervals are every 3 months on construction sites, every 6 months in manufacturing, at least every 12 months in other hostile environments, and at each hire and every 3 months for hire equipment.
Can you test hardwired 3 phase machinery?
Test and tag covers equipment connected by a plug and lead. Hardwired machinery is part of the fixed electrical installation, and work on it needs a registered electrical worker. Ask us about hardwired machinery when you book.
Will my equipment need to be switched off?
Yes, briefly. Each item is unplugged for testing. For production equipment, we plan the testing around your shifts or downtime so the work does not stop the line.
How much does 3 phase appliance testing cost?
We give a fixed quote per site, based on the number and type of 3 phase items and whether you need single phase test and tag or RCD testing on the same visit. A list of your 3 phase equipment helps us quote accurately.
Can you test our single phase equipment at the same time?
Yes. Most sites with 3 phase equipment also have power tools, leads, power boards and RCDs. We can test all of it on one visit and give you a single register with every item's next due date.
What happens if a 3 phase item fails?
We label it as failed, record why, and list it in your report so it can be taken out of service. Repair or replacement is your decision, and the item should be retested before it goes back into use.

Related guides

Get a quote for 3 phase appliance testing

We send quotes the same day and call back within 15 minutes during business hours. Prefer to talk? Call 08 8151 1040.

No obligation. We only use your details to reply to this request.

Book your next service

Tell us what's on site and we'll send a fixed price the same day.

Call 08 8151 1040 Get a quote