Based in Enfield. Working across Adelaide and regional SA. 08 8151 1040

Fire Danger Ratings explained for South Australia

The Australian Fire Danger Rating System has four levels, Moderate, High, Extreme and Catastrophic, and a "no rating" state for days when no action is needed. The rating tells you how dangerous a fire would be if one started, not how likely a fire is, and in South Australia a Total Fire Ban is declared on days rated Extreme or Catastrophic.

Every afternoon during the warmer months, the CFS publishes a Fire Danger Rating for each of South Australia’s 15 fire ban districts. It’s the single most useful number for deciding what you, your family or your staff do the next day. Here is what each level means and what the CFS says to do.

What is a fire danger rating?

The CFS describes the Fire Danger Rating as “an indicator of how dangerous a bushfire could be if it did occur. It is not a predictor of how likely a bushfire is to occur” (CFS Australian Fire Danger Ratings). The higher the rating, the more dangerous the conditions.

The CFS determines the ratings with the Bureau of Meteorology, using forecast weather, current observations and information about the vegetation that could fuel a fire. Since 1 September 2022, the Australian Fire Danger Rating System (AFDRS) has used the same colours and terms across the country, so the levels mean the same thing in Adelaide as they do interstate.

What do the fire danger ratings mean?

The table uses the CFS’s own words for each level.

Rating What it means What to do
No rating No proactive action is required Stay aware. Fires can still happen
Moderate Most fires can be controlled Plan and prepare
High Fires can be dangerous Be ready to act
Extreme (Total Fire Ban) Fires will spread quickly and be extremely dangerous Take action now to protect your life and property
Catastrophic (Total Fire Ban) If a fire starts and takes hold, lives are likely to be lost For your survival, leave bushfire risk areas

Moderate

Plan and prepare. Stay up to date and be ready to act if there is a fire. The CFS notes that controlled burning may happen in these conditions if it is safe, so check whether permits apply before you burn.

High

Be ready to act. There’s a heightened risk, and if a fire starts your life and property may be at risk. Be alert for fires in your area and decide what you will do if one starts. The CFS fact sheet adds that the safest option is to avoid bushfire risk areas, and that burning permits may be suspended at this level.

Extreme

Take action now to protect your life and property. These are dangerous fire conditions, and the CFS says you must be physically and mentally prepared to defend in them. Check your Bushfire Survival Plan and that your property is fire ready. If a fire starts, act straight away. If you and your property are not prepared to the highest level, go to a safer location well before the fire arrives. Reconsider travel through bushfire risk areas.

Catastrophic

For your survival, leave bushfire risk areas. These are the worst conditions for a bush or grass fire, and the CFS is blunt: homes are not designed or constructed to withstand fires in these conditions. Leave high risk bushfire areas the night before or early in the day. Don’t wait and see. Decide in advance when you will leave, where you will go, how you will get there, when you will return and what you will do if you can’t leave.

No rating

The AFDRS uses “no rating” for days when no proactive action is needed. The CFS says this doesn’t mean fires can’t happen, only that they are less likely to behave in a way that threatens the community.

In South Australia, Total Fire Bans are declared for days where the Fire Danger Rating is Extreme or Catastrophic (CFS Total Fire Bans and Ratings). So when you see an Extreme or Catastrophic rating for your district, expect a ban on outdoor fires, outdoor hot work and solid fuel barbecues. Our Total Fire Ban guide lists what’s allowed.

A rating is different from a warning. Ratings describe the danger a community could face if a fire started, so you can act before one does. Warnings, such as Watch and Act and Emergency Warning messages, tell you what to do once a fire is underway.

Where can you find today’s fire danger rating in SA?

  • The CFS Total Fire Bans and Ratings page, which shows a 4-day forecast for each district. The next day’s ratings are published between 4.30 pm and 5 pm.
  • The Alert SA app.
  • The CFS Information Hotline on 1800 362 361 (TTY 133 677).
  • Local radio.

Ratings are set by fire ban district, so you need to know yours. Most of the Adelaide plains are in Adelaide Metropolitan, while suburbs such as Stirling, Belair and Flagstaff Hill are in Mount Lofty Ranges. Our Fire Danger Season guide lists the district for every Adelaide council.

How should a household or workplace use the ratings?

The CFS says to use the rating as an early trigger for your plans. Don’t wait for smoke. Check the next day’s rating each afternoon and decide that evening.

For a household in a bushfire risk area, that means a written Bushfire Survival Plan that says what you do at each level. The CFS has free templates on its Make a plan page.

For a business, the CFS suggests setting procedures by rating. For example, you may enact one procedure on days predicted to be Extreme and another on days predicted to be Catastrophic (CFS business fire safety). A simple version looks like this:

  • Moderate and High: name the person who checks the rating each afternoon and tells staff. Check extinguishers and emergency kits are ready.
  • Extreme: stop outdoor hot work and solid fuel cooking under the ban rules, and reconsider staff travel through bushfire risk areas.
  • Catastrophic: close or relocate sites in high risk bushfire areas, and move people the night before or early in the morning.

It helps to know how exposed your site is. Eden Hills and Coromandel Valley, for example, are each more than 90% covered by the Planning and Design Code’s High Risk bushfire overlay. Our guide to bushfire overlays explains how to check an address, and our bushfire preparation guide for businesses covers the full plan.

The CFS also notes that industries needing more detail can use the Fire Behaviour Index, which gives more in-depth information about the fire danger.

VD Fire & Electrical writes workplace emergency plans and evacuation diagrams, quoted per site. See our emergency management plans service or call 08 8151 1040.

Frequently asked questions

Why did the fire danger ratings change in 2022?
The CFS says social research found most people in bushfire risk areas didn't understand the old system, and there were calls for something simpler and more action oriented. The new system started on 1 September 2022 with the same colours and terms across Australia, backed by better science on how fuels burn (CFS).
Does a High fire danger rating mean there's a Total Fire Ban?
No. In SA, Total Fire Bans are declared for days rated Extreme or Catastrophic. A High day still matters, though. The CFS fact sheet says burning permits may be suspended once the fire danger reaches High, and Harvest Safety Alerts may be issued for areas at High and above.
Who sets the fire danger rating in South Australia?
The CFS works with the Bureau of Meteorology. Ratings are calculated from forecast weather, current observations and information about the vegetation that could fuel a fire (CFS).
What time is the fire danger rating published?
The CFS publishes the next day's ratings between 4.30 pm and 5 pm. It also shows a 4-day forecast, but days 2, 3 and 4 are preliminary and can change with the weather and other factors.
Can a bushfire start on a Moderate or no rating day?
Yes. The rating describes how dangerous a fire would be, not whether one will start. The CFS says most fires can be controlled on a Moderate day, and that "no rating" doesn't mean fires can't happen, only that they are less likely to threaten the community.

Book your next service

Tell us what's on site and we'll send a fixed price the same day.

Call 08 8151 1040 Get a quote