Test and tag is priced per item, so the quickest way to estimate your cost is to count what plugs in. With VD Fire & Electrical, standard test and tag starts from $3.50 + GST per item. What turns that rate into a yearly figure is how many items you have, what kind they are, and how often your workplace needs to retest.
What does test and tag cost per item?
Our published rate is from $3.50 + GST per item. Each item tested gets:
- a visual inspection of the item, cord and plug
- the electrical tests that suit its class and type
- a durable tag showing the tester, the date, the result and the next due date
- an entry in an equipment register you keep for your records
Items that fail are labelled and reported so they can be taken out of service. If something needs replacing, we quote it before doing the work. See our test and tag service for the full scope.
“From” means it’s a starting rate. The quote for your site comes from your actual list of equipment, so ask for one before comparing prices.
What changes the total cost?
These are the things that move a test and tag bill up or down:
- Number of items. The biggest factor by far. Every lead, power board, extension cord and appliance counts as an item.
- 3 phase equipment. 3 phase plug-in machines aren’t priced at the standard item rate. We give a fixed quote per site, based on the number and type of items, for 3 phase appliance testing.
- RCDs. Safety switches, portable or fixed, are tested for trip time with an RCD tester. That’s quoted per site on the number and type of RCDs. See RCD testing.
- How often you retest. A building site retests far more often than an office, so the same equipment can mean very different yearly costs. More on that below.
- Access and site conditions. Items spread across floors, kept at height, in secure areas or only reachable after hours take longer than gear gathered in one room.
- Travel. We travel to all regional areas of South Australia, and travel fees apply outside metropolitan Adelaide. We confirm the fee with your quote.
How often will you pay for testing?
The retest interval decides how many times a year you pay. SafeWork SA’s inspection and testing guidance sets these intervals for plug-in equipment, based on AS/NZS 3760:2022 and, for building sites, AS/NZS 3012:
| Workplace or equipment | Test and tag interval |
|---|---|
| Portable equipment on construction and demolition sites | 3 months |
| Factories, workshops, manufacturing, assembly and maintenance | 6 months |
| Commercial cleaning equipment | 6 months |
| Equipment that is flexed in normal use or in a hostile environment | 12 months |
| Hotels, motels, boarding houses, hostels and similar residential areas | 2 years |
| Equipment not flexed in normal use, not open to abuse and not in a hostile environment | 5 years |
| Hire equipment | Inspected before each hire, tested and tagged every 3 months |
So count item tests as well as items. A workshop with 40 items on a 6-month cycle has 80 item tests a year. The same 40 items on a building site, tested every 3 months, means 160. Office equipment that fits the 5-year row may be tested once in that whole period. Your risk assessment can still call for shorter intervals, and SafeWork SA says the class of work and the risks of the equipment decide how often it is tested. Our guide to how often you need to test and tag goes through the intervals in more detail.
How can you keep test and tag costs down?
You can’t skip the testing your workplace needs, but you can avoid paying for more than that:
- Set intervals by area. A workshop with an office attached doesn’t need the office gear on the workshop’s 6-month cycle if it meets the criteria for a longer interval.
- Retire what you don’t use. Spare leads and broken appliances in a cupboard get tested too if they stay in use. Get rid of what you won’t use before the technician arrives.
- Gather portable items. Collecting leads, power boards and tools in one place before the visit saves time on site.
- Book the whole site at once. One visit for everything due is quicker than several part visits.
- Don’t retest new gear straight away. SafeWork SA says new equipment is deemed tested by the manufacturer. It still needs a check for damage before use, and on building sites it must be tagged with its next due date.
What does skipping test and tag cost?
More than the testing. SafeWork SA lists expiation fees of $432 for an individual and $2,160 for a body corporate for failing to have equipment in hostile environments inspected and tested, and the same amounts for failing to have RCDs tested regularly. Not keeping proper test records carries expiation fees of $144 for an individual and $720 for a body corporate.
The record is part of the job. SafeWork SA says each record must show who did the testing, the date, the outcome and when the next test is due. A tag can do that, or a logbook, register or database. If you’re on a building site, our test and tag colours guide explains the quarterly colour system.
Getting a quote
The simplest way to get a firm price is to send us a rough count of items, the type of site and whether you have RCDs or 3 phase gear. VD Fire & Electrical tests and tags across Adelaide from $3.50 + GST per item, from our base in Enfield. Call 08 8151 1040 or request a quote.