A fire safety audit answers one question: if there were a fire in your building today, would the equipment work and could everyone get out? It’s a walk-through of the building and a check of its paperwork. In South Australia it is usually measured against your Form 1, MBS 002 and your emergency plan.
What does a fire safety audit check?
An audit starts with the equipment your building must maintain. That list is on your Form 1, the schedule of essential safety provisions issued for the building. The MFS says maintenance of essential safety provisions in SA must follow Ministerial Building Standard 002, in line with AS 1851 (MFS). The auditor checks each item is there, accessible, tagged and within its service interval.
Councils give examples of what these provisions include (City of Marion, City of Burnside):
- fire extinguishers
- fire hose reels and fire hydrants
- fire detection and alarm systems
- sprinkler systems
- emergency and exit lighting
- fire doors and exit doors
The auditor also notes anything that is installed but not on the Form 1, or on the Form 1 but no longer there, and checks that evacuation diagrams are on display and match the building.
How are exits and evacuation checked?
The SA Government’s guide to council Building Fire Safety Committees lists what makes the fire safety of an existing building inadequate. It is a useful checklist for any audit, because it is what an inspecting committee would look for. Among other things, the guide lists:
- blocked or obstructed exits, and obstructions in paths of travel to exits
- exits that are too narrow, or too few, for the number of occupants
- excessive travel distances to exits
- door hardware or door swings that are likely to slow people down
- not enough lighting for people to find and use exits in an emergency
- no first attack firefighting equipment, such as extinguishers, for occupants to use
- occupants not getting adequate warning of a fire
- fire hazards or excessive fire loads that could block evacuation
- the fire brigade being unable to reach or use the building’s fire services
So an audit walks every exit route, opens the exit doors, checks exit signs and emergency lights, and looks at whether storage or furniture has crept into corridors and stairs.
What paperwork does an audit look at?
This is the part that separates an audit from a quick look around. For us, an inspection checks the equipment on the day, and an audit adds the paperwork:
- The Form 1. Does it match what’s installed?
- Service records and tags. Has every service been done on time through the year? A missing 6-monthly service leaves a gap in the year’s records.
- The last Form 3. The owner must lodge it with council within 60 business days after the end of each calendar year. The City of Marion says fines range from a $750 on-the-spot fee up to $10,000 if prosecuted (City of Marion).
- The emergency plan. Under WHS regulation 43, every workplace must have an emergency plan that covers emergency and evacuation procedures, notifying emergency services, medical help, communication during an emergency, how often the procedures are tested, and training for workers (SafeWork SA, WHS Regulations (SA)). The plan must also be kept effective, so an audit checks it still matches the building and the people in it.
Does an audit check housekeeping?
Yes, because housekeeping is where buildings most often drift. The auditor looks for rubbish and stock stored against exit doors, fire doors wedged open, and extinguishers hidden behind goods. Under the SA WHS Regulations, a business that keeps flammable or combustible substances must keep them at the lowest practicable quantity for the workplace, and that includes gas cylinders and liquid containers, whether empty or full (regulation 53).
How is an audit different from routine testing?
Routine testing is the scheduled servicing of each item: an extinguisher every 6 months, an exit light on its own cycle, and so on. The technician services the item and moves on.
An audit steps back and looks at the building as a whole. It asks whether the right equipment is there for the building as it is used today, whether the records are complete for the year, whether people can get out, and whether the emergency plan is still right. It’s a check on the system, rather than a service of each part.
Most buildings need both. Testing keeps each item working. An audit makes sure nothing has fallen through the gaps.
When should you get a fire safety audit?
- When you buy or lease a building, so you know what you’ve taken on.
- When you take over as property or strata manager, before you sign anything off.
- When you change fire contractors, so no service is missed in the changeover.
- Before lodging your Form 3, to make sure the year’s records are complete.
- After a council or committee letter. A Building Fire Safety Committee can inspect buildings and issue notices. See our guide to Building Fire Safety Committee inspections.
Our annual fire safety checklist covers what to keep on top of between audits.
Book a free first fire safety audit
VD Fire & Electrical’s first fire safety audit is free, with no obligation to book any follow-up work with us. We’re based in Enfield and work across Adelaide. Call 08 8151 1040 or see our fire safety inspections and audits page.