If a letter from a Building Fire Safety Committee has landed on your desk, or you’ve been told an inspection is coming, it helps to know what these committees are and what they can and can’t do. They’re a normal part of how South Australian councils look after the fire safety of existing buildings. Many matters start with a letter rather than a notice. The City of Burnside’s terms of reference, for example, say issues will generally be raised with the owner by letter first, with a response date, before the committee considers a notice.
What is a Building Fire Safety Committee?
Section 157 of the Planning, Development and Infrastructure Act 2016 (the PDI Act) gives councils the power to investigate whether building owners are maintaining proper levels of fire safety. A Building Fire Safety Committee is the “appropriate authority” that uses that power. A council sets it up under section 157(17), either on its own or with neighbouring councils as a regional committee (SA Government guide to council Building Fire Safety Committees).
Under the guide, a committee needs at least three members:
- a person with prescribed qualifications in building surveying
- an authorised officer of the fire service, approved by the MFS or CFS Chief Officer for the area
- a person with expertise in fire safety
Councils can add a fourth member if they choose.
Which buildings do committees inspect?
The guide says inspections must be carried out when the fire authority asks for one, and may also follow a complaint, an audit program or a targeted look at high-risk buildings. It gives two examples of buildings a committee might treat as a high-risk priority: buildings with overnight accommodation for unrelated people, and buildings where large crowds gather, such as shops or assembly buildings.
Each committee sets its own priorities. For example:
- City of West Torrens. The committee focuses on buildings where members of the public stay or gather, such as aged care facilities, hotels and sporting clubrooms (City of West Torrens).
- City of Burnside. Its terms of reference put requests from the MFS or CFS first, then complaints, advice from a council development officer, and building types the committee has listed as priorities (Burnside terms of reference).
- The Barossa Council. Its policy says a complaint goes to an authorised officer to inspect first, and the matter is referred to the committee if needed (Barossa Building Fire Safety Policy).
What happens at an inspection?
The guide recommends the committee writes to the owner before inspecting, so the owner can be there. An authorised officer or committee members then walk the building. They judge it against three priorities set by section 157, in this order: a reasonable standard of fire safety for the people in the building, minimal spread of fire and smoke, and an acceptable environment for firefighters.
In practice, the guide lists problems such as:
- blocked or obstructed exits and paths of travel
- too few exits, or exits too narrow for the number of people
- long travel distances to exits
- door hardware or door swings that slow down evacuation
- not enough lighting to find and use exits in an emergency
- no first attack firefighting equipment for occupants
- people not getting enough warning of a fire
- fire hazards or excessive fire loads, which can include combustible linings and cladding
- the fire brigade being unable to reach or use the building’s fire services
Where the fire safety isn’t adequate, the guide says the committee’s role is to work with the owner on a cost-effective solution.
What notices can a committee issue?
The guide describes two notices under section 157.
Section 157(3) Notice of Fire Safety Defect. This tells the owner the fire safety isn’t adequate. It can require the owner to report to the committee on the work or other measures needed, within two months unless the committee agrees to longer. In an emergency, it can instead require the owner to carry out a program of work or other measures to overcome the fire hazard, which may include evacuating all or part of the building.
Section 157(7) Notice of Building Work or Other Actions Required. This can require the owner to seek development approval and carry out a program of work, or prohibit use of all or part of the building until the hazard is gone. It must set a time to complete the work. The guide says committees can allow work in stages, as long as risks to life safety are dealt with first.
Owners have rights. You can make representations to the committee, ask for a notice to be varied or revoked, and appeal to the Environment, Resources and Development (ERD) Court within 14 days. A notice still applies while an appeal is heard, unless the Court orders otherwise. When the work is finished, you must tell the committee in writing.
Ignoring a notice is an offence. The September 2020 guide lists a maximum penalty of $20,000, plus $200 for each day the failure continues, for not complying with a section 157(4)(b) or 157(7) notice. It lists a maximum of $2,500 for not reporting within two months, or for not telling the committee the work is done.
How does it link to Form 3?
Form 3 is the owner’s annual certificate to council that the building’s essential safety provisions are being maintained. It is due within 60 business days after the end of each calendar year. Some smaller buildings are exempt from lodging it, but the City of Marion’s fact sheet says the exemption doesn’t apply to a building that has been subject to a fire safety notice under section 157 (City of Marion). So a notice can put a building that has never lodged a Form 3 into the yearly cycle.
Good maintenance records also make an inspection easier. If your extinguishers, exit lights, alarms and doors are serviced on time and the records are complete, there is far less for a committee to find.
Committees by council
Arrangements differ between councils. A few examples from council documents:
- Burnside: its own committee, with a building surveyor, an MFS or CFS representative and a fire safety expert, meeting at least three times a year.
- Salisbury: the Salisbury Building Fire Safety Committee, set up under section 157(17), meeting at least three times a year (terms of reference).
- West Torrens: its own committee, including an independent fire safety expert and an MFS representative.
- Barossa: its own committee. Its policy says agendas and minutes are not published.
- Mount Gambier: the City of Mount Gambier Building Fire Safety Committee, which meets at least once a year (terms of reference).
Each council page on our site notes that council’s committee arrangement where we have found one.
What to do if you get a letter or notice
- Read the dates. Note the response date in the letter, the two-month reporting period in a 157(3) notice, and the 14-day appeal window.
- Get the facts. Have the building inspected against the items listed, and pull together your Form 1, service records and last Form 3.
- Fix the simple things now. Cleared exits, working exit lights and serviced extinguishers can often be sorted quickly.
- Get the right help for design changes. If the committee wants building work, you may need a building certifier or another suitably qualified building professional.
- Report back in writing, and tell the committee when the work is complete.
VD Fire & Electrical can audit your building against a committee’s letter, bring overdue servicing up to date, and sign off the Form 2 and Form 3 maintenance documentation for the provisions we maintain. Your first fire safety audit is free. See essential safety provisions and Form 3 or what is checked in a fire safety audit.