Based in Enfield. Working across Adelaide and regional SA. 08 8151 1040

What is SCADA? A plain guide to SCADA, PLCs and HMIs

SCADA (supervisory control and data acquisition) is a system that gathers data from equipment spread across a site or a region, shows it to operators in one control room, and lets them control that equipment remotely. Out in the field, PLCs or remote terminal units (RTUs) run the local process, and operators see and control it through an HMI, the screen or panel they interact with.

If you run a factory, a pumping station or a treatment plant, you’ve probably heard SCADA, PLC and HMI used in the same sentence. They work together, but they aren’t the same thing. This guide explains each part in plain terms, using the definitions in NIST’s Guide to Operational Technology Security (SP 800-82 Revision 3, September 2023).

What is a SCADA system?

SCADA stands for supervisory control and data acquisition. NIST describes it as a computerised system that gathers and processes data and applies operational controls over long distances (NIST glossary).

SCADA is used where equipment is spread out and you need to see all of it from one place. NIST lists water distribution and wastewater collection systems, oil and gas pipelines, electricity transmission and distribution, and rail and public transport as typical uses. A SCADA system collects information from the field, sends it to a control centre and displays it to the operator, so one person can monitor or control a whole system in near real time.

What are the parts of a SCADA system?

NIST breaks a typical SCADA system into a few pieces.

Field sites. These are where the equipment is: a pump station, a reservoir, a substation. Each site has remote terminal units (RTUs) or PLCs that control actuators, such as valves and motors, and read sensors, such as level, pressure and flow.

Communications. Radio, telephone line, cable, fibre or satellite links carry data between the field sites and the control centre.

The control centre. This houses the control server, which stores and processes data from the field. It also holds the HMI, engineering workstations and the data historian, all connected on a local network. The control centre logs what the field sites report, raises alarms, and handles trend analysis and reporting.

The software. It is programmed with what to monitor and when, which ranges are acceptable, and what to do when a value moves outside them. Depending on the set-up, control can be automatic or done by operator command.

What is a PLC?

A programmable logic controller is a solid-state control system with a user-programmable memory. It stores instructions for functions such as input and output control, logic, timing, counting, PID control, communications, arithmetic, and data processing (NIST glossary).

In plain terms, a PLC is the industrial computer that runs the machine or process. It reads its inputs (a level switch, a pressure sensor, a start button), runs its program, and switches its outputs (a pump, a valve, a conveyor).

PLCs turn up in three places, according to NIST:

  • Inside a SCADA system, as the controller at a field site, doing a similar job to an RTU.
  • Inside a DCS, as a local controller under a supervisory control layer.
  • On their own, as the main controller of a smaller system such as a production line. These set-ups often have no central control server or HMI and run mostly closed-loop control with little human involvement.

What is an HMI?

A human machine interface is the hardware or software through which an operator interacts with a controller (NIST glossary). It can be as simple as a panel with buttons and indicator lights, or a full industrial computer with a colour screen running specialised software.

On a single machine, the HMI might be a touch screen on the control panel door. In a SCADA control room, it’s the set of screens showing the whole system, with alarms and trends.

How is SCADA different from a DCS?

Both are supervisory control systems, but NIST separates them by geography.

  • SCADA controls assets that are spread out, where collecting data centrally matters as much as control. Think of a water network with pump stations across a region.
  • A DCS (distributed control system) controls production within one location. NIST lists industries such as oil refineries, water and wastewater treatment, electric power generation, chemical manufacturing, automotive production and pharmaceutical processing.

Do SCADA and PLC systems need cyber security?

Yes. NIST’s guide exists to help organisations secure these systems. It notes that SCADA systems are usually designed to be fault tolerant, with significant redundancy built in, but that redundancy may not be enough against a deliberate attack. Field sites often have remote access for diagnostics, which is one reason access and network design matter. If your plant is connected to the office network or the internet, it’s worth reviewing how that connection is controlled.

Where VD’s automation work fits

VD Fire & Electrical’s engineering line works at the control level. We program PLCs, modify existing programs (where the program is available and not locked by its original supplier), and add monitoring so operators can see what the plant is doing. We also design and install communication systems, develop embedded systems, and integrate fire alarm systems with building plant. Every project is tested and commissioned as a whole before handover, with documentation and program backups. Electrical installation work is carried out through our licensed electrical contractor.

Tell us which PLC, HMI and SCADA platforms your site runs and we’ll say plainly whether we can support them. See automation and controls, or electrical design for the power and control panels behind the system.

Frequently asked questions

What does SCADA stand for?
Supervisory control and data acquisition. NIST describes it as a computerised system that gathers and processes data and applies operational controls over long distances, with typical uses including power transmission and distribution and pipeline systems.
Is a PLC the same as SCADA?
No. A PLC is a controller that runs a local process. SCADA is the wider system that collects data from many PLCs or RTUs, shows it to operators and sends their commands back. A small machine can run on a PLC alone, with no SCADA at all.
What is an RTU?
A remote terminal unit. In a SCADA system it sits at a field site, controls the local equipment and passes data back to the control server. NIST notes that PLCs used in SCADA systems may do a similar job to RTUs.
What is a data historian?
A system that stores process data over time. In NIST's description of a SCADA control centre, the historian sits on the same network as the HMI and engineering workstations, and the control centre uses the logged data for alarms, trend analysis and reporting.
Can SCADA control equipment automatically?
Yes. NIST says control can be automatic or performed by operator commands, depending on how the system is set up. The software is programmed with what to monitor, which ranges are acceptable and what to do when a value moves outside them.

Book your next service

Tell us what's on site and we'll send a fixed price the same day.

Call 08 8151 1040 Get a quote