A fire drill, or evacuation drill, is a practice run of your emergency plan so people know the alarm, the route and the assembly area. In South Australia your emergency plan sets how often you test it under WHS regulation 43, SafeWork SA’s code suggests at least every 12 months, and childcare services must rehearse every 3 months.
A drill is the way to find out that the alarm can’t be heard in the warehouse, that the back exit is locked, or that nobody knows where the assembly area is, before it matters.
What SA law requires
Every workplace in South Australia must have an emergency plan under regulation 43 of the Work Health and Safety Regulations 2012 (SA). The plan must cover emergency and evacuation procedures, notifying emergency services, medical assistance, communication, and information, training and instruction for workers. It must also provide for testing of the emergency procedures, including how often they are tested.
So the law doesn’t set one drill frequency for every workplace. It makes you decide, write it in the plan and do it. SafeWork SA’s Code of Practice on managing the work environment and facilities explains the duty, and lists regular evacuation practice drills at least every 12 months among the things emergency procedures should address. AS 3745 is the best-practice standard for emergency planning and exercises, but no SA law we have found mandates it. See our guide to AS 3745.
Sector minimums
Some sectors set their own minimum:
| Sector | Requirement | Source |
|---|---|---|
| Childcare (education and care services) | Rehearse emergency and evacuation procedures every 3 months | ACECQA and Education Standards Board SA |
| Aged care | Emergency plans regularly tested | Strengthened Aged Care Quality Standards, outcome 2.10 |
| NDIS providers | Emergency plans tested and reviewed, with every worker trained | NDIS Practice Standards |
South Australia’s Education Standards Board expects services to rehearse one invacuation and one evacuation procedure every 3 months, and to review the potential emergencies risk assessment every 12 months.
Choosing how often to drill
If no sector rule applies, start from the code’s 12 months and drill more often where the risk is higher:
- High turnover or casual staff: drill more often, so new people learn the route.
- People who need help to evacuate: drill more often and test the assisted evacuation itself.
- Shifts: make sure every shift takes part over the year. Drilling the day shift alone leaves the others untested.
- After a change: drill after a fit-out, a new exit, a new alarm or a new tenancy.
Write the frequency in your emergency plan, then keep to it.
Before the drill
- Check the equipment. Confirm the alarm, exit signs, emergency lighting and exit doors work. A drill that discovers a faulty exit light is useful. One that injures someone on a dark stair is not.
- Brief the wardens. They need to know the scenario, their area and what to report.
- Pick a scenario. “Fire in the kitchen, main stair blocked” tests more than a general alarm.
- Plan for people who need help. Decide how they will take part safely.
- Notify where needed. If the alarm is monitored, contact the monitoring provider. Tell neighbours or other tenants if they will hear it.
- Appoint an observer with a watch and a checklist.
During the drill
The observer notes:
- when the alarm started and whether everyone could hear it
- whether wardens checked their areas, including toilets, storerooms and meeting rooms
- whether people used the nearest exit, or the one they always use
- whether anyone stopped for belongings, used a lift or went back
- how long until the last person reached the assembly area
- whether everyone was accounted for, including visitors and contractors
After the drill
Hold a short debrief with the wardens while it is fresh. Record the date, scenario, time to evacuate, who took part, problems found and actions. Fix the problems, update the emergency plan and evacuation diagrams if needed, and check the fixes at the next drill. Those records are your evidence that the plan has been tested and kept effective.
Common problems drills find
- An alarm that can’t be heard in plant rooms, cool rooms or noisy work areas
- Exit doors locked, blocked or hard to open
- Assembly areas that are too small or in the path of fire brigade vehicles
- Wardens missing on some shifts
- Visitors and contractors not signed in, so nobody knows who is missing
Many of these are equipment faults we can fix. See fire alarm testing, emergency and exit lighting and emergency management plans, or call VD Fire & Electrical on 08 8151 1040. To check the diagrams people follow on the day, see our guide to evacuation diagram requirements in SA.