What fire safety signs do
Fire safety signs answer two questions in the first seconds of an emergency: where is the equipment, and what should I do? An extinguisher behind a pillar, a hose reel in a dim corridor or a blanket tucked beside a fridge can be found quickly if there is a sign above it. Without one, people waste time looking, or don’t look at all.
Signs also stop the slow problems that let fire safety slip: stock piled in front of a hose reel, a fire door wedged open, or a cabinet locked because nobody knew what was inside.
Signs and your other fire safety records
Signs work alongside your evacuation diagrams, which show the routes and equipment on a floor plan. Exit signs are a separate system: they are illuminated and are tested with your emergency lighting. See emergency and exit lighting.
Signs checked at every service
Because we service extinguishers, blankets, hose reels and exit lights, we check the signs every time we check the equipment. At each visit our technician looks for:
- missing signs, or signs left behind where equipment has been removed
- the wrong sign, such as a powder sign above a CO2 extinguisher after a swap
- faded, damaged or painted-over signs
- signs hidden by new shelving, stock, partitions or decorations
- new equipment installed without a sign
Each fault goes in your service report, by location, with a quote to fix it. That keeps the signs in step with the equipment instead of drifting out of date between fit-outs.
What makes a sign work
A sign only helps if someone sees it at the moment they need it. When we check or fit signs, we ask four questions:
- Can it be seen from where people approach? A sign flat against a wall at the end of a corridor is visible. The same sign around a corner is not.
- Is it above the clutter? Shelving, stock, screens and seasonal decorations creep upwards. A sign at head height in an empty room can be hidden in a busy one.
- Does it match what is under it? After equipment is swapped, a sign for the old type can send someone to grab the wrong extinguisher.
- Is it still readable? Sun, kitchen grease, cleaning chemicals and paint all wear signs down.
Shared buildings and tenancies
In a building with several tenants, the owner usually controls the common areas, the fire systems and the signs that go with them, while each tenant fits out its own space. That split is where signs go missing: a tenant’s partition hides a hose reel sign, or a fit-out moves an extinguisher and leaves the sign behind. When we service a building, we report sign faults to whoever controls that area, so the right party can fix them.
After a fit-out or a move
Fit-outs are where signage goes wrong. Walls move, extinguishers are relocated, a hose reel ends up in a storeroom, and the old signs stay where they were. After any fit-out, ask us to walk the site, match signs to the new equipment positions and update your diagrams and service records at the same time.
Who we check signs for
We check fire safety signs for offices, warehouses, shops, cafés, schools, childcare centres, medical centres, strata buildings and construction sites across Adelaide, on the same visit as an equipment service. See fire extinguishers and fire blankets.
Standards and service frequency in SA
| Equipment | How often | Standard | SA source |
|---|---|---|---|
| Exit signs | 6-monthly and yearly, plus monthly checks | AS/NZS 2293.2 (maintenance) | MBS 002 v3 (SA) |
| Workplace emergency plan and information | Kept effective | WHS Regulations 2012 (SA), regulation 43 | SafeWork SA |
Who this is for
- Commercial officesWe service the fire safety systems in Adelaide offices and commercial buildings, from extinguishers and exit lights to alarms and fire doors, and supply the records behind the owner's Form 3.
- Industrial and warehousesWe service the fire safety systems in Adelaide warehouses, factories and industrial sites, from extinguishers and hose reels to hydrants, sprinklers and exit lights, and test and tag the equipment on the floor.
- Hospitality and retailWe service the fire safety equipment in Adelaide restaurants, cafés, pubs and shops, from wet chemical extinguishers and fire blankets in the kitchen to exit lights and test and tag.
- Strata and apartmentsWe maintain the fire safety systems on the common property of Adelaide strata and community title buildings and supply the records the corporation needs for its annual Form 3.
- Schools and childcareWe service the fire safety equipment in Adelaide schools, kindergartens and childcare centres, and help services prepare for the evacuation rehearsals they must run.
- Healthcare and medicalWe service the fire safety systems in Adelaide medical centres, dental and allied health clinics and other healthcare buildings, and supply the records behind the owner's Form 3.
- Construction sitesWe test and tag site electrical equipment, supply and service fire extinguishers, and help builders put emergency plans in place on Adelaide construction sites.
Certificates and reporting
Every visit ends with a written report listing each item tested, its location and result, and anything that needs attention. Building owners use it as the maintenance record behind their annual Form 3. We are qualified and authorised to carry out fire safety maintenance and sign off SA council ESP Form 2 and Form 3 maintenance documentation.
Ask us for a sample report if you want to see the format before you book.
Who does the work
- FPAS Recognised BusinessFire Protection Accreditation Scheme
- FPA Australia Bronze MemberFire Protection Association Australia
- Engineers AustraliaMember of the national body for engineers
- CBS PGE fire plumbing licenceConsumer and Business Services SA
- Licensed for electrical test and tagAS/NZS 3760 testing
All licences and certificates are held by suitably qualified personnel, and we are fully insured.